6a72b229b1
try probing for blockdev only if probing fails; report failure to user
2019-04-29 15:58:19 +12:00
e8423acd28
do storage probing in the background
2019-04-29 15:54:47 +12:00
3e8bc81190
add some logging around moving between screens
...
my best guess at why CI is currently hanging sometimes is that the
'next-screen' signal is being sent too often / too early. add some
logging around this so that we will be able to confirm / deny this by
reading the logs.
2019-04-18 10:22:05 +12:00
488f6fd2c0
Lock answers file.
2019-04-12 17:36:12 +01:00
7cc56a8b58
trying to debug edge ci failures
...
* add a bit more logging
* wait for initial network apply to finish before moving on from
network screen
2019-04-04 12:06:41 +13:00
ec15929d60
Update to probert tip
...
The minimum required: it still only looks at the "blockdev" key in the
probe data, none of the exciting new stuff.
2019-04-02 13:43:09 +13:00
3384eb5c84
small fixes
2019-03-26 11:32:02 +13:00
b485cf487b
make the re-dhcp on entry to the network screen a little more discreet
2019-03-26 10:59:50 +13:00
099e658670
make applying changes less jarring for virtual devices
2019-03-26 10:59:50 +13:00
23488a6f2e
some fixes found in testing
2019-03-26 10:59:50 +13:00
b571b3d1a9
track and display DHCP status
...
Mark all devices with DHCP enabled as pending when the config is
applied, and mark them as timed out ten seconds later if they have not
received any addresses.
2019-03-26 10:57:36 +13:00
eae2497d41
auto disable inactive NICs
...
This disables any NIC that does not have a global address by the first
time the network screen is shown
2019-03-26 10:57:36 +13:00
3bb9268974
apply network changes immediately, rather than when the "Done" is pressed
...
diff makes this change look more involved than really necessary :(
2019-03-26 10:57:33 +13:00
594db86618
have DownNetworkDevices do its work in a background thread
...
not that it should block, but no reason not to
2019-03-26 10:57:13 +13:00
ff59de4a9c
change "Done" button to "Continue without network" if there is no default route
2019-03-26 10:57:13 +13:00
680da7d299
rename/redefine default route waiter to watcher
...
the callbacks now get called whenever the set of default routes changes,
not just when one appears
2019-03-26 10:57:13 +13:00
c0f4a90179
refactor network view
...
The visible impact of this is that the addresses for a NIC are now
displayed underneath its name and a long "info line" (i.e. mac / model /
vendor) for a nic no longer distorts its table.
This lays the groundwork for better handling of NICs that fail to dhcp
and things like that.
2019-03-25 09:25:53 +13:00
d2349b0507
move spinner to subiquitycore
2019-03-21 14:48:48 +13:00
bc1a1e7fe6
fix Signal.register to accommodate strange urwid behaviour
2019-03-14 09:55:03 +13:00
b169d35316
display any error received when checking for updates
2019-03-12 11:49:03 +13:00
b91c961165
implement screens up to the point of offering the update
...
don't display anything about check failures yet, or actually allow the
user to start the update
2019-03-12 11:49:03 +13:00
9aea579027
support a controller being shown more than once
2019-03-12 11:48:58 +13:00
a888ed222c
kick off snap list when a default route appears, not at startup
...
of course in the common case these are more or less the same time. but
this is conceptually nicer
2019-03-07 15:46:40 +13:00
a51f04b02c
start network probing after all signals have been connected
2019-03-07 15:31:39 +13:00
6e077ef457
move code for configuring snapd proxy out of snaplist controller
2019-03-07 15:18:34 +13:00
1c5ce7c07a
remove no-longer-used code for stacking signals
2019-03-07 14:22:50 +13:00
756d923424
remove long disabled views for setting default route
...
as and when we add route configuration to subiquity, we will need new
views anyway.
2019-03-07 14:13:37 +13:00
d0c41469a7
remove login model/controller/view from subiquitycore
...
long ago subsumed into other code
2019-03-07 14:01:52 +13:00
9937ebe6e1
add a more systematic way for controllers to record their state
...
so we can return the point where the user left off on update
2019-03-06 15:55:15 +13:00
98bf6a4254
add a way for a controller to be skipped
...
will need this for the refresh screen if there is no update
2019-03-06 15:32:31 +13:00
53d1006a06
Make the code for talking to snapd more generic
...
In preparation for the self-refresh and snap enterprise proxy work, both
of which will require talking to the snapd API.
This also makes the "snaps-from-examples" fakery happen at a lower level.
2019-03-04 16:18:57 +13:00
3b4d7a4266
move snap title into header
2019-02-27 15:56:02 +13:00
2587b6dd02
fix some dodgy algebra in scrollbars
2019-02-27 14:28:05 +13:00
b77aa9499e
make sure all delays during replaying answers repsect SUBIQUITY_REPLAY_TIMESCALE
2019-02-21 11:07:54 +01:00
bc755cc953
fix a race condition in network answers support
2019-02-21 09:32:45 +01:00
c571f58dcc
fix saving static network data with search domains
2019-02-21 08:35:19 +01:00
f25bb21c08
fix netdev info dialog
2019-02-19 14:40:19 +01:00
f4cf947b0a
center the list of disks
2019-02-04 17:41:11 +13:00
fae9be9103
make the network view slightly less of a snowflake
2019-02-04 17:25:31 +13:00
0b3d44f911
oops
2019-02-04 16:17:58 +13:00
4e0af495df
more
2019-02-04 14:47:00 +13:00
a553246a30
add a min_width of 96 to the content area of the "standard" view
2019-02-04 14:43:19 +13:00
aebb0b2e2e
fill identity fields if you go back to that form
2018-12-13 14:49:55 +13:00
2eb9420a75
move ssh key fetching over to ssh view
2018-12-13 14:15:43 +13:00
16a853107e
add form fields to ssh view
2018-12-13 14:15:43 +13:00
0d35fa613c
core: special case s390x vt220 console on /dev/ttysclp0, as it supports colors.
2018-11-23 01:24:34 +00:00
bee1109a2d
Much more fine grained answers support for networking.
2018-10-31 09:59:31 +13:00
5f8e3dc2a4
do not call next-screen from a background thread
2018-10-31 09:58:58 +13:00
09bbe3ff19
Do not call the default route waiter repeatedly.
...
This can crash when multiple interfaces get routes.
2018-10-31 09:58:58 +13:00
15b6bb1114
Major refactor of network model
...
The main thrust of this is to not create virtual interfaces until
applying the config.
This meant that the network model has to change a bit to be able to
represent interfaces that do not yet exist on the system. I did this
by ripping out most of the existing network device code: now a
NetworkDev is really just a wrapper for the config for a device and (if
it exists) the netlink data too. A few places had to adjust to checking
if the netlink info is available before accessing it but all in all it
was not that painful.
There are a few other refactorings in this commit that perhaps should be
split out (how the bond parameters are handled, some stuff about
resizing the table rows when interfaces are edited) but it doesn't
really seem worth it.
2018-10-31 09:58:56 +13:00
Michael Hudson-Doyle