08e51b87ae
move some listboxs inside their padding
2017-10-20 15:51:01 +13:00
b6a27582c9
redo padding and layout of network views
2017-10-20 14:55:01 +13:00
2c6fb9ed99
hide network error if showing before starting config again
2017-09-28 16:00:35 -04:00
785b4d5568
Fix up more fixed layouts with button_pile().
2017-09-20 14:01:42 +01:00
f000fc24eb
add a helper to pad a pile of buttons just enough
2017-09-20 14:55:02 +12:00
9356501aa7
change cancel buttons to back buttons where appropriate
...
and also some "Done" buttons become "Save" buttons.
2017-09-18 17:19:27 +01:00
693f3e7c7d
Barebones i18n setup.
2017-09-18 14:14:39 +01:00
91d57c50f2
a slightly different approach
2017-09-15 10:40:11 +12:00
7c5e55e0b2
Update color palette
...
Create palette for traffic light buttons: green (default), amber and
red. Color-code most buttons.
Make all progressbars orange for the completed part.
2017-09-12 12:05:44 +01:00
1b328dbb61
work around urwid crash
...
see https://github.com/urwid/urwid/issues/253
2017-09-08 12:36:44 +12:00
e0f75ba013
tweaks to network views
...
1) move the done / cancel buttons (and error display) out of scrolling region
2) focus done by default
3) update footer texts to make sense
4) use a bit more of the horizontal space to show interface information
2017-09-08 09:48:41 +12:00
395b30451e
stop being clever in handling of escape in network screens
2017-04-05 14:36:46 +12:00
404ca627da
use evilnick's wording on the network page
2017-03-02 13:52:20 +13:00
65f9d1ef62
move show_overlay to BaseView
2017-02-14 16:16:19 +13:00
f0eb2cdf70
make Color.button etc apply the corresponding focus map
...
about 1e6 times more readable
2017-02-08 15:37:18 +13:00
3c5ac3140f
use new containers everywhere
2017-02-03 14:21:39 +13:00
0caf13181e
Do not say a netdev is not configured when there is no configuration
2017-01-11 15:42:16 +13:00
4de99bd41e
use the ip version as a parameter a bunch more
2016-12-12 15:54:33 +13:00
7c90a9e4da
Fix crash when an interface has more than one IP address of the same family.
2016-11-11 11:29:57 +13:00
a7bfef3646
show error message from netplan generate when it fails
2016-11-08 10:39:54 +13:00
cacd456a6a
Adapt to netlink event driven version of probert.
2016-11-07 16:56:32 +13:00
82b11dbd69
reorganize the network model and make the UI a bit more consistent
...
The main change here is to separate the state a network device is in and the
state we want it to be in. So it now parses the netplan config on a system as
well as probing the state of via probert.
The UI is changed to make this distintion too, and be IMO a bit more
consistent. Somewhere in this I've removed the display of whether the
probed address was found via DHCP or not, possibly that should be put
back if it doesn't make things too cluttered.
In dry-run mode, we now still write the config and feed it to netplan, but
in a way that doesn't affect the system we are running it on.
2016-11-07 15:15:46 +13:00
f603207d94
remove most trivial use of signals from console-conf's flow
2016-10-11 12:48:28 +13:00
e348207597
Remove most use of signals from welcome and network views.
2016-10-10 16:47:42 +13:00
d9095336e5
do not have controllers (or view code!!) know the order of the screens
2016-09-27 21:35:47 +13:00
dad0e10912
completely separate menu -> signal and signal -> method mappings
...
and put the signal -> method mapping into the controller
this breaks the subiquity part even more than before, but it's pretty broken
already.
2016-09-27 20:53:17 +13:00
f78cae64bd
Show if a link is not connected.
...
At least as well as ip(8) does it.
2016-09-16 14:28:40 +12:00
e608362b34
Merge pull request #154 from CanonicalLtd/mwhudson/wifi-ui
...
Add a basic UI for entering wifi config details.
2016-09-09 15:33:48 -04:00
bf827db28d
fix scrolling with many interfaces
2016-09-05 21:07:56 +12:00
bf3384596e
a start a configure-wifi ui
2016-09-05 12:03:06 +12:00
0a2546b3bd
do not probe network on returning from network sub-screen
...
otherwise we overwrite our settings with the probed data!
2016-08-23 12:47:55 +12:00
efa8ef43d2
allow configuration to be canceled
2016-08-22 17:02:42 +12:00
958ab1a339
Show decent error messages on failure.
...
Signed-off-by: Mathieu Trudel-Lapierre <mathieu.trudel-lapierre@canonical.com>
2016-08-18 16:15:28 -04:00
0c8deeece4
Update padding sizes for prettier output; account for future translations.
2016-08-16 22:15:41 -04:00
0e93ab3e61
Check we're online, display network error otherwise.
2016-08-16 15:25:58 -04:00
0e92883a83
Make it a little more obvious where labels are in fact buttons or menus
2016-08-16 15:01:51 -04:00
11782ced12
Improve handling of the default routes.
2016-08-16 12:59:19 -04:00
cac89c30e9
Do bonding, dhcp toggle, and segregate IPv4 and IPv6 again.
2016-08-16 00:48:15 -04:00
0f82a12208
Allow setting IPs and rendering as yaml
2016-08-15 17:05:19 -04:00
18c7e93cc2
WIP: Remove actions, port to an approximation of network yaml v2.
2016-08-13 00:13:22 -04:00
d73ef34774
Display IPv6 addresses.
2016-08-12 17:55:03 -04:00
6754a15c93
Allow more than one IPv4 address on an interface, and leave room for IPv6.
2016-08-09 15:11:02 -04:00
04a6d88ffe
rename ViewPolicy to BaseView
2016-07-26 14:21:24 +12:00
264f698299
Fix flake8 warnings in subiquitycore.
...
Except for line length warnings, because life is too short of that.
A few of these are real bugs.
2016-07-25 14:44:51 +12:00
1d8c5b3cdb
Deal with the fact there may be no default route for an IP family.
2016-07-06 18:30:43 -04:00
0205423133
Do a slightly better job at showing default gateways.
2016-07-06 18:14:13 -04:00
73d73dff94
NetworkView: rework layout for network info based on review.
...
Signed-off-by: Mathieu Trudel-Lapierre <mathieu.trudel-lapierre@canonical.com>
2016-06-30 17:24:31 -04:00
e1970b6477
Rename subiquity to subiquitycore -- will serve as base classes for everything
...
Signed-off-by: Mathieu Trudel-Lapierre <mathieu.trudel-lapierre@canonical.com>
2016-06-30 14:17:01 -04:00
Michael Hudson-Doyle