b80145a99c
simplify some generic view code
2017-01-13 15:08:31 +13:00
9cb0c00271
remove some unused code from utils.py
2017-01-13 15:08:31 +13:00
ac7e7cd08b
remove BaseModel as it no longer does anything
2017-01-13 15:08:31 +13:00
bfba9f21b5
remove unused stuff from log.py
2017-01-13 15:08:31 +13:00
6febf16d22
clean up some silly stuff in core.py
2017-01-13 15:08:31 +13:00
17b943209e
remove subiquitycore/async.py
...
it was just a glorified global variable.
2017-01-13 15:08:31 +13:00
5c40c0eb19
remove meta.py, contains no code
2017-01-13 15:08:31 +13:00
60c6037a8a
move curtin.py from subiquitycore to subiquity
2017-01-13 15:08:31 +13:00
0caf13181e
Do not say a netdev is not configured when there is no configuration
2017-01-11 15:42:16 +13:00
ae05b66a47
rewrite Selector to work like an HTML <select> widget
...
This was way way harder than it seemed like it should be, but it seems a lot
nicer to me.
For https://bugs.launchpad.net/ubuntu/+source/subiquity/+bug/1654387
2017-01-09 16:11:32 +13:00
b9a990171c
identity: don't quit after subiquity/subiquitycore identity controller, it should be able to continue to the next screen.
2016-12-22 22:16:15 -05:00
87b8dc3ccc
Support conditional 'shell=True' calls, required for top's redirection, and not supported in curtin...
2016-12-22 22:15:02 -05:00
862684efbc
Fix stop calls for subiquity service.
2016-12-22 22:12:03 -05:00
d9f60688fc
Adapt curtin_install_cmd and run_command_sync calls to API changes in run_command()...
2016-12-22 08:52:21 -05:00
df800bf8b3
fix header of WIFI config screen
...
See https://bugs.launchpad.net/bugs/1651119
2016-12-22 12:16:39 +13:00
09b8235b07
Fix displaying IPs for login view in subiquitycore.
2016-12-21 17:18:08 -05:00
87eb961586
Re-add get_configured_interfaces() for subiquity.
2016-12-20 15:42:37 -05:00
449688f9a1
Fix controller ordering and disable step for subiquity
2016-12-20 15:42:04 -05:00
01c42205f0
Fix identity controller for subiquity; correctly process done signal and displaying local user info.
2016-12-20 15:40:28 -05:00
21d3f78c9c
use a IPv6 example address on manual ipv6 screen
2016-12-15 14:17:49 +13:00
38c600528b
remove some of the ip-version-in-method-name methods
2016-12-12 15:58:41 +13:00
4de99bd41e
use the ip version as a parameter a bunch more
2016-12-12 15:54:33 +13:00
2a716df0ad
add and use NetworkConfigureIPv6InterfaceView
2016-12-12 15:45:45 +13:00
8582e2bc02
network_configure_manual_interface.py -> network_configure_ipv4_interface.py
2016-12-12 15:41:30 +13:00
be69509efa
parameterize NetworkConfigureIPv4InterfaceView
2016-12-12 15:40:07 +13:00
1efaed7648
add network model interfaces that take ip version as a parameter
2016-12-12 15:34:59 +13:00
15bb9afcc2
move identityview to subiquity
...
subiquity and console-conf do not share any view code any more
2016-11-23 09:54:36 +13:00
65daafde05
fix run_command of a non-existent command
2016-11-22 21:31:51 +13:00
bd9046ae9c
squash some more trivial uses of signals
...
And move the @view decorator and associated methods used by the network
stuff somewhere more general.
2016-11-22 16:09:51 +13:00
9ba1c8feff
get subiquity to the point where it at least starts
2016-11-21 13:32:58 +13:00
7c90a9e4da
Fix crash when an interface has more than one IP address of the same family.
2016-11-11 11:29:57 +13:00
7bef718e18
re-work logic, including having console-conf generate the file to show
2016-11-09 14:33:58 +13:00
19081d53bc
reparse netplan configs after writing config
...
'netplan apply' can re-plug network interfaces, so it looked like we
forgot how an interface had been configured
2016-11-09 12:21:06 +13:00
344b177f16
validate user input a lot more thoroughly in the static ipv4 view
2016-11-08 11:07:20 +13:00
a7bfef3646
show error message from netplan generate when it fails
2016-11-08 10:39:54 +13:00
8a44befe2a
remove UI for customizing default route, not supported by netplan
...
Yet, anyway.
2016-11-08 10:39:05 +13:00
31b21799b7
remove dependency on netifaces
2016-11-07 16:56:36 +13:00
c4fdf5cb72
allow choosing from visible networks when configuring wifi
2016-11-07 16:56:36 +13:00
cacd456a6a
Adapt to netlink event driven version of probert.
2016-11-07 16:56:32 +13:00
82b11dbd69
reorganize the network model and make the UI a bit more consistent
...
The main change here is to separate the state a network device is in and the
state we want it to be in. So it now parses the netplan config on a system as
well as probing the state of via probert.
The UI is changed to make this distintion too, and be IMO a bit more
consistent. Somewhere in this I've removed the display of whether the
probed address was found via DHCP or not, possibly that should be put
back if it doesn't make things too cluttered.
In dry-run mode, we now still write the config and feed it to netplan, but
in a way that doesn't affect the system we are running it on.
2016-11-07 15:15:46 +13:00
d48a70973e
restore escape key behaviour
2016-11-02 12:44:04 +13:00
f9de0818a8
fix C-x
2016-11-02 12:24:06 +13:00
6b99559819
oops
2016-11-02 12:14:01 +13:00
91e42e37bd
Merge branch 'master' into mwhudson/kill-some-signals
2016-11-02 12:00:47 +13:00
019b5c4b3e
make properly sure that the wifi password does not get logged
...
Two of these were properly stupid :(
LP: #1636421 (again)
2016-10-28 13:14:05 +13:00
74be6a382a
launchpad allows = in emails too
2016-10-27 09:28:52 +13:00
ef0da85568
allow + in email addresses
2016-10-27 09:24:21 +13:00
47af1de57e
remove setting of umask, redact wifi password from log file
...
The setting of umask was breaking configuring wifi :(
2016-10-26 11:02:23 +13:00
6318de27cf
make sure selecting dhcp after manual configuration clears out gateway & nameserver config
2016-10-21 08:59:34 +13:00
6d93221a43
do not add empty strings to nameservers or search_domains
2016-10-21 08:59:09 +13:00
Michael Hudson-Doyle